| |
 | |  VCDS VAG912 Support UDS protocol |  | | VAG COM 912 ( Same cable as 908.1 Chinese version)
Beta versions contain new features and functions that have not yet been as fully tested as have Release versions. If you use a Beta, you may find bugs or problems and you are expected to report them to Ross-Tech so that we can fix them before making a new Release. Please be sure that you have also installed the latest version on your computer as well so that you can revert back to using that if you encounter problems with the Beta.
Beta 912.0 includes the following new features and improvements:
Basic Settings for latest Control Modules using UDS/ODX/ASAM protocols.
As is the case for other functions under UDS, there are no longer any channel or group numbers. Instead, the Basic Setting to be performed must be selected from a drop-down list:
On UDS control modules which offer "Instructions", VCDS will automatically display them:
In addition, UDS Measuring Values can be displayed simultaneously:
Added ability to view Measuring Values during UDS Output Tests. This can be handy to verify that certain outputs are functioning as intended:
Improved Readiness screen, now shows name of script in title bar and under [Set Readiness] button, or gives a reason why [Set Readiness] is disabled when that is the case:
Support for new and revised models such as the face-lifted 2010 T5 van.
New, revised and expanded ODX/ASAM data set, supporting Basic Settings function and additional new control modules under UDS.
Works only with Intelligent Interfaces (HEX, KEY and Micro-CAN).
Works on Windows 2000, XP, Vista and 7. Windows 95, 98 and ME are no longer supported.
Default installation location is C:Ross-TechVCDS-Beta. If allowed to install to its default location, it will not overwrite or interfere with the use of Release 908.
Caution: Please connect the OBD connector to the car first; wait about 10 seconds, then connect the USB to the computer | |
|  | | VAG K+CAN COMMANDER 3.6 Audi VW | | | VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+
Security code reading (CAN) / Read/Write EEPROM memory
VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6
K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM
Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Sko bia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)
Read/Write EEPROM of Engine Control Units
BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8. (extracting security code, odometer correction, enable disable immobilizer and s.o.)
Porsche 911 (996/997), Porsche Boxter, Porsche Cayman, Porsche Cayenne - Read EEPROM via OBDII
BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, MED9x - FSI, EDC16x - Read flashmemory by OBDII (near update programming of flash memories with function for resetting of reflashing counter)
Key learning function (without need of secutity access code/login)
Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Sko bia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)
Key learning Cayenne (CAN)
VAG MMI TV Activation - A6,A8,Q7
Package Including:
1pc x VAG K+CAN Commander 3.6 Cable
1pc x CD Drive
| |
|  | | VAG TACHO USB 3.01+OPEL IMMO | | | Latest update:VW Polo ,Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect.
Single click access for VDO Seed-Key dashes!
(This means: VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia to 2004 year , some Seat dashes up to 2004 year ect...)
VAG Kombiinstrument / Immo box eeprom programmer... via OBD connector!
Works on any computer that has USB port! No more virtual COM Ports!
This is a TRUE USB connection! Windows XP compatible software
Bosch/Motometer dashes for VW 2001-2003 years V07.04 & V07.05 & V07.08 (with scan for 2'nd pass)
Audi A4,A6,A8 separate immo box 1994-1999 read PIN code,and read/write eeprom!
Audi A3,A4,A6,TT, New Beetle Magnetti Marelli M73 (1998-2003 year) read PIN code / change mileage!
New Beetle Magnetti Marelli M73 (2001 to 2005 year) read PIN code
Almost all VDO dashes for VW/Seat/Skoda up to year 2004 read/write eeprom!
Almost all VDO dashes for Audi up to year 2001 read/write eeprom!
Almost all MotoMeter dashes for VW/Seat up to year 2001 read/write eeprom!
Automatic functions: Change mileage, Read PIN code !
All this by using car OBD connector! Without disassembly dash or immo box from car!
agTacho + Opel-Immo-AirBag Scanner
Supplement for OPEL IMMO-1 IMMO-2 and AIR-Bag Tool
Package Including:
1pc x VAG TACHO USB3.01+ OPEL IMMO Cable
1pc x CD Drive
| |
|  | | VAGCOM 912 HEX CAN USB(vagcom latest version) | | | Data Version 20091201 lastest version.
VAG COM V912, VAG 912, VCDS V912
Beta versions contain new features and functions that have not yet been as fully tested as have Release versions. If you use a Beta, you may find bugs or problems and you are expected to report them to Ross-Tech so that we can fix them before making a new Release. Please be sure that you have also installed the latest version on your computer as well so that you can revert back to using that if you encounter problems with the Beta.
Beta 912.0 includes the following new features and improvements:
Basic Settings for latest Control Modules using UDS/ODX/ASAM protocols.
As is the case for other functions under UDS, there are no longer any channel or group numbers. Instead, the Basic Setting to be performed must be selected from a drop-down list:
On UDS control modules which offer "Instructions", VCDS will automatically display them:
In addition, UDS Measuring Values can be displayed simultaneously:
Added ability to view Measuring Values during UDS Output Tests. This can be handy to verify that certain outputs are functioning as intended:
Improved Readiness screen, now shows name of script in title bar and under [Set Readiness] button, or gives a reason why [Set Readiness] is disabled when that is the case:
Support for new and revised models such as the face-lifted 2010 T5 van.
New, revised and expanded ODX/ASAM data set, supporting Basic Settings function and additional new control modules under UDS.
Works only with Intelligent Interfaces (HEX, KEY and Micro-CAN).
Works on Windows 2000, XP, Vista and 7. Windows 95, 98 and ME are no longer supported.
Default installation location is C:Ross-TechVCDS-Beta. If allowed to install to its default location, it will not overwrite or interfere with the use of Release 908.
Caution: Please connect the OBD connector to the car first; wait about 10 seconds, then connect the USB to the computer | |
|  | | 4-IN-1 VAG TOOL KIT | | | 4-IN-1 VAG TOOL KIT include four tools: VAG DASH COM +CAN, VAGdashCOM, VAG ECU TOOL, VAG KEY LOGIN
VAG DASH COM +CAN
NEW: EDC16 / EDC15 / ME7 via the OBD EEprom read and write (EDC15/ME7 completely KM EDC16 currently stand will be constantly expanded.
After a lengthy development phase, we are proud
Our new product to introduce:
VAGdashCAN is a newly designed program of our house,
VAG vehicles that the new generation.
These are now on the diagnostic socket set.
From the Volkswagen Touran, new combi-tools installed,
only via the CAN-diagnosis can be addressed.
The VAGdashCAN determines the LOGIN and allows an adjustment or recovery of the KM-stand.
A special highlight is the Schlusselanlernungsfunktion.
Pushing a button allows you to teach key
and without waiting 5 minutes
and without that all semi-key must be available!
In addition, some extra features, in everyday life workshop a valuable aid.
This includes, inter alia, the diagnostic capability of each joint in the vehicle CAN controllers.
Now you can order for these vehicles the error memory read and delete.
A valuable extension of your spectrum.
Secure your market advantage, by selecting one of the first to of this exceptional software.
|
Folgende Fahrzeugmodelle werde derzeit unterstutzt The following vehicle models are currently supported: |
|
Audi A4Audi |
Bosch RB4 2001 - 07.2005 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
Audi A3 |
VDO 2003 - 2004 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Touareg Phaeton |
VDO |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Golf V |
VDO 2003 - 07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Touran |
VDO 2002 - 07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Caddy |
VDO 2003 - 07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Jetta |
VDO 2003 - 07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Passat B6 |
VDO 2004 - 07.2006 |
KM-Stand |
|
VW Eos |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Individual |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
VW Individual |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
SKODA Octavia II |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
Skoda Scout |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
Skoda Roomster |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
SEAT Altea XL |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
SEAT Altea |
07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
SEAT Leon |
VDO 2005 - 07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
|
SEAT Toledo |
VDO 2005 - 07.2006 |
KM Booth, login, Schlusseldirektanlernungsfunktion |
VAGdashCOM
VAGdashCOM is the unique advanced diagnostic tool to read out the internal memory of your Instrument cluster
You can display the login code, recalibrate the odometer and rewrite the EEpromdata in case of changing an instrument.
VAGdashCOM covers up the models 1998-2004 such as:
Golf IV
Passat
Polo 6N
Eurovan T4
Eurovan T5
Skoda
Seat
Audi A3 / A2 / A6
Audi A4 till 2000
All those models with communication via K-line
VAG ECU TOOL
The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.
Read and write access to the EEprom.
Reading the secret odometer (if stored in the engine control unit)
Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU.
With the write function is motor control "cloning" - no need to teach.
Indispensable for workshops, recovery or Chiptuning.
Functions of the program:
serial EEprom read and save
EEprom checksum checking and correction
IMMO on / off
EEprom from a file and write (clone function)
Read / write access to the login
Read / write access to the chassis number
Read / write access to the Immobilizernummer
Kilometers Motronic in the read and write (if available)
In the ME7 .** controllers can also perform the following functions:
Offset channels
Mixture enrichment
Idling torque change
Lambda value
Idle speed change
Correct charge (only for Turbo engines)
Ignition timing change
supports the following types of motor control of BOSCH:
EDC15
EDC15VM
EDC15P
EDC15P + BOSCH ME7.5
BOSCH ME7.5.1
BOSCH ME7.1
BOSCH ME7.1.1
VAG KEY LOGIN
The tool used to determine the login code in many VAG-no speedometer,
Engine ECUs and Immobilizerboxen. The integrated software Schusselanlernprozedur make this the perfect tool for the key service Included are the special OBD connection interface, USB cable and the software on CD.
The following control and tachometer options are supported:
VDO speedometer VW / Audi 1998-2005 (with Seat / Skoda partly until 2006)
Motometertachos VW 1998-2004 (Golf, Passat)
Magneti Marelli M73 tachometers 1998-2001 (eg, TT, Beetle)
EDC15 VM 2000-2004 (eg T4, Golf4, Passat 3BG with distributor injection pump)
EDC15 P + 2000-2004 (all PumpeDuse, Golf4, Passat, A4, A6)
ME 7.5 (eg, 1.8T, TT, V5)
ME 7.1.1 (eg, R32, Audi V6)
Temic IMMO the boxes of the LT's to the Year 2005
Most models of the white boxes Audi 12polig 1994-1998
6 pin boxes VW 1994-1998 (only with key semiskilled readable)
| |
|  | | VAG ECU TOOL | | | VAG ECU TOOL is for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7
- Read and write access to the EEprom
- Reading the secret odometer (if stored in the engine control unit)
- Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU
- With the write function is motor control "cloning" - no need to teach
- Indispensable for workshops, recovery or Chiptuning
VAG ECU TOOL Functions of the program
- serial EEprom read and save
- EEprom checksum checking and correction
- IMMO on / off
- EEprom from a file and write (clone function)
- Read / write access to the login
- Read / write access to the chassis number
- Read / write access to the Immobilizernummer
- Kilometers Motronic in the read and write (if available)
In the ME7 .** controllers can also perform the following functions
- Offset channels
- Mixture enrichment
- Idling torque change
- Lambda value
- Idle speed change
- Correct charge (only for Turbo engines)
- Ignition timing change
VAG ECU tool supports the following types of motor control of BOSCH
- EDC15
- EDC15VM
- EDC15P
- EDC15P + BOSCH ME7.5
- BOSCH ME7.5.1
- BOSCH ME7.1
- BOSCH ME7.1.1
| |
|
|
|
Total:19 Page：1/4
1 [2][3] 8 : |
|
|
